Molten Salt Boiler
Advantages and Features
- ASME, NFPA and DIN4754 Standards Design
- orking Temperature of The Molten Salt Pot is 270-550 °C
- Minimum and Maximum Amount of Salt Transfer is 2.5-6.6 kg/hr
- Thermal Shock Tolerance
- High Resistance to Moisture Connections
- Possibility of Continuous Heating of Salt
The least and the maximum amount of salt mass flow rate is 2.5 and 6.6 kg/hr
This thermal system is designed to tolerate thermal shocks.
Molten salt tank is designed so as to keep salt warm to prevent it from separation of system
Product Introduction
Because of the limitation of the different boiling points of variable materials at high temperatures, fluids like water, oil and … can not be used for heat transfer. Therefore, at high temperature until 550 °C, molten salt is used as a heat transfer fluid. In order to use molten salt for raising temperature, the increase of pressure is not required.
Features:
- ASME and NFPA standards are used in this design
- The maximum and the least operation temperature of molten salt tank is 550 and 270 °C, respectively
- The least and the maximum amount of salt mass flow rate is 2.5 and 6.6 kg/h
- Materials used in the design of molten salt has the least amount of corrosion and thermal conduction and have the capability to operate at high temperatures
- The choice of materials, pumps, gates and installations has a significant role in the design of molten salt systems and all of the fittings should be sealed
- Ceramic fiber with thickness of 100 mm and the density of 135 kg/m3 is used to insult a boiler and installations. This material has the capability to tolerate the temperature of 1320 °C
- This thermal system is designed to tolerate thermal shocks
- Molten salt tank is designed so as to keep salt warm to prevent it from separation of system
- Controller devices are selected so that they can tolerate high temperatures and changing temperature dose not have any impact on their operation
- This device can be used in aluminum oxide production, melamine board, reactors, solar energy and generally in the applications which need high temperature
Selected Product Images
Standards
