Why Daboo-Sanat?
The company, Knowledge Base of DAF steel dubbing, began its activity in the energy and facilities industry with the aim of designing, manufacturing and producing a variety of heating systems since 1973. One of the products of the collection collection is a variety of boilers used in various industries (steam, hot water, hot water and hot oil), heat exchangers, liquid filter types, diverter, pressure vessels, a variety of energy reduction systems, packages Multifunctional machine tools, air heaters (heater) and industrial burners are designed and built according to the type of use and working conditions completely by the units of research and development and technical engineering.
Saving Energy
New Products
Optional
Invironmental Freindly
R&D Department
The Research and Development Department of Daboo-Sanat is established to give innovative solutions. This department goes forward by finding solutions to optimize energy efficiency of products.
In parallel with the development of new products, this department develops new fabrication processes.
Optimizing product performances, anticipate the market needs, design the heating systems for the future, design the efficient production means, design the production lines as from the creation of the new products and optimizing the product costs are main responsibilities of the department.
Numbers of high experienced engineers, technicians and researchers are working in this department with multiple skills in all fields such as mechanics, automatism, hydraulics, metallurgy, composite materials and thermal treatment.
New Industrial Achievements
Daboo-Sanat has been presented new industrial products using the latest international experiences and utilizing local experts. Most important new products are as follows:
• Exhaust heat recovery system in steam and hot oil boilers using Economizers,
• Exhaust heat recovery system in generators and turbines by designing Waste Gas Boilers.
• Designing Solid Fuel and Biomass Thermal Boiler (Steam or Hot Oil) which uses swarf of chipboard or MDF.
Normalizing, Annealing and Stress Relief Furnace
Stress relieving is heating a structure uniformly to a specified temperature that is below the critical temperature and then cooling it uniformly. Residual stress may form in components due to various reasons and operations such as rolling, casting, forging, bending & welding.
Stress relief furnace is used to eliminate residual stress in the component and expand its life time as a result 56 burners are mounted in this furnace to achieve the operational temperature of 1100oC with the temperature precision of 1oC.
Corrugated Furnace
Corrugated furnace is used in the production of large capacity boilers instead of conventional furnaces. Life time extension, efficiency improvement and high resistance against stresses are the most important results.
Using Intelligent Control Device for Water Supply
According to failure of water system and switching ON and OFF the pump repeatedly Daboo-Sanat company designed intelligent control device with the fixed flow that minimize tum OFF the pump and increasing the life time of the pump.
Resident Inspector
Increased production capacity & the need to testing the products precisely lead to on-site inspecting program. The Resident Inspectors program uses trained on-site residents to help us to review the quality of our services. Resident Inspectors work alongside Daboo-Sanat staff to inspect key service areas, review how services are delivered in practice and make recommendations for improvement. Resident Inspectors play a key role in ensuring Daboo-Sanat services are delivered to a high level.
All resident inspectors are approved by Iranian Standard and Quality Organization.
The Use of Ceramic Fiber Instead of Rockwool
Ceramic fiber used in Daboo-Sanat has density of 128 kg/m3 and capability to tolerate the temperature of 1260 and 1400°C which are much higher than the maximum operation temperature of rock wool. In addition, it is obvious that the amount of energy loss in rock wool is 30% higher than that of ceramic fiber by comparing heat transfer coefficients at similar operation temperature with the same thickness.
For this reason, the use of ceramic fiber in higher temperature causes to save significant amount of energy. There are other reasons for the preference of using ceramic fiber instead of rock wool. For example, the changes of heat transfer coefficient by time for two materials are completely different. As all we know, heat transfer coefficient of insulations increases by time and their insulated characteristic declines. This characteristic is more sensible in rock wool compared with ceramic fiber. That is to say, in a shorter time, their heat transfer coefficient increases more significantly. Furthermore, because of considerable amount of iron oxide and lime in rock wool, its resistance against moisture is very low, so it needs a waterproof cover. By contrast, all of materials used in ceramic fiber include aluminum oxide and silicon oxide which will not damage in the present of moisture. Meanwhile, ceramic fiber is not only an insulator but also it is incombustible. In contrast, rock wool is just an insulator and is combustible.
Test under Operational Conditions before Delivery
All products are tested under operational conditions after leaving the production line & before delivering to the customers. Products must pass the demands of designing and work properly with pre-defined thermal efficiency.
Energy Consumption Reducer Components
Heat recovery products reduce energy costs and environmental impact by recovering waste heat or steam and using it for other system applications.
This in turn helps the boiler system components work together to increase the life and overall efficiency of the entire boiler system. 
Economizers, recuperators, turbulators and finned surfaces are energy consumption reducer devices those could be installed on boiler systems according to capacity and operational pressure and saving features.
Educational conferences
Due to the importance of launching and proper operation of the products sold, which will increase the useful life of the products, they will do so at certain intervals to hold training conferences. At these one-day conferences, which will be fully funded by the company, inviting experts and professors will examine the latest safety issues, as well as maintenance and maintenance of a variety of boilers, and will be explained to the participants at the conference. Training courses are organized on a regular basis by the training and after-sales service department. In these conferences, while introducing dobosnat products, the use of control equipment, burners and water purification systems is taught.