Softener
Advantages and Features
- Tubes Used are Galvanize, Polyethylene
- Nozzles Used are High-Pressure Polyethylene and Brass
- Controller Systems are Semiautomatic, and Full Automatic
controller systems are manual, semiautomatic, and fully automatic.
Tubes used are galvanize, polyethylene, and carbon steel pipes with epoxy cover.
Product Introduction
One of the main problems in the household and industrial applications especially in steam boilers is hard water. The main cause of deposit formation is calcium and magnesium ions in water, which are usually in forms of carbonates and white deposits. Other hard disturbing ions are iron and manganese ions, which are scarce in water.
One of the most beneficial and surest approaches to remove disturbing ions is to apply resin softener, which resolves the problem by replacing water-disturbing ions and removing them.
Features:
- The softener supply is constructed by stainless steel sheet, FRP, galvanize, and carbon steel with zinc-rich layer and epoxy. In addition, it is equipped by a manhole.
- Steel used is DIN 175155 – 17 MN 4 pressurized tanks.
- Tubes used are galvanize, polyethylene, and carbon steel pipes with epoxy cover.
- All of welds are SAW and SMAW in accordance with WPS and PQR based on ASME standard.
- Nozzles used in water collection and distribution process are high-pressure polyethylene and brass.
- Controller systems are manual, semiautomatic, and full automatic.
- The softener is equipped by sampling valve, de aeration, and gauge pressure.
- Operation pressure, designed pressure, test pressure are 5, 5.5 and 8 bar. (There is possibility to design and produce this device at higher pressure according to consumer order).
- The inside of the device is covered with solar lancer with a zinc-rich layer and two epoxy layers before sandblast.
- The outside of the device is covered with a stainless layer and an oil painting layer.
Selected Product Images
Standards
