Hot Air Generator
Advantages and Features
- Its Efficiency is 85%,
- In These Heat Exchangers Resistant Steel is Used
- This Heat Exchanger is a Kind of Non-Direct Heat Exchanger
- The Temperature of Heat Exchanger Body is Controlled
- The Working Life of These Heat Exchangers is High
In these heat exchangers resistant steel is used
Finned tubes technology is utilized to develop heat transfer area
A kind of non-direct heat exchanger and produces clean air
Product Introduction
Hot air generator heats cold air passing through a heat exchanger and makes the space in use warm by sending this warm air to ducts installed on floor, ceiling, and walls. These systems are known as an efficient alternative for heating by hot water. According to the non-requirement of wet distribution system, (include plumbing system and radiators), the likely danger of leak or chilblain reduces significantly. In addition, because of non-installation of heating units in the consumer space, more space can be provided for the designers and consumers.
Hot air generators have longer service life compared with wet heating systems. One of the main benefits of these systems is the direct heating of air as a working fluid and results in the reduction of time required for reaching desired temperature.
Air heating generator is used as a central heating system or as a single heating unit in the space in use. This system is an ideal choice in terms of energy consumption, primary, and maintenance for different applications like heating glasshouses, sports complexes, and conference halls.
Features:
- Its efficiency is 85%.
- In these heat exchangers resistant steel is used.
- In this heat exchanger, finned tubes technology is utilized to develop heat transfer area.
- This heat exchanger is a kind of non-direct heat exchanger and produces clean air.
- Not to mention hot air, the temperature of heat exchanger body is controlled.
- Combustion security system is designed and produced according to the fuel type and based on NFPA- 86- C.
- Fresh air can be used as an input air or the whole air in salon can be reversed to reuse. In addition, a controller system can be devised to use the desired proportional of fresh air and reversed air.
- The working life of these heat exchangers is high because of applying incombustible sheets, which have the capability to tolerate the least temperature of 1150 °C at the atmospheric conditions.
- For heat exchanger body the suitable insulation is rock wool and ceramic fiber based on operation and the weather condition.
- Because of special design, this heat exchanger has the least amount of environmental pollution.
- High – pressure centrifugal fans are used in these heat exchangers. Therefore, the pressure of hot air produced is higher than that of flame fan blower.
- This heat exchanger has the capability to return 100% of air flow.
- There are sensors to control the temperatures of main furnaces and flue gases.
Selected Product Images
Standards
